5065M, 5075M, 5085M, 5095M, 5095MH and 5105M Tractors Operator's Manual
Copyright 2009 (c) Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Identification Views
Section : 05 - Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Spanish Safety Sign and Operator's Manual
Prevent Machine Runaway
Use Seat Belt Properly
Keep Riders Off Machine
Operating the Tractor Safely
Stopping and Parking Tractor
Use Caution on Hillsides
Freeing a Mired Machine
Handle Fuel Safely-Avoid Fires
Prepare for Emergencies
Handle Starting Fluid Safely
Wear Protective Clothing
Avoid Contact with Pesticides
Do Not Use Starting Fluid
Prevent Acid Burns
Use Safety Lights and Devices
Use a Safety Chain
Transporting on Carrier
Store Attachments Safely
Transport Towed Equipment at Safe Speeds
Stay Clear of Rotating Drivelines
Practice Safe Maintenance
Section : 10 - Safety Signs
Replace Damaged or Missing Safety Signs
Safety Signs-All
Safety Signs-ROPS
Safety Signs-OOS
Safety Signs-Cab
Safety Signs-Mid Mount and Rear SCV (If Equipped)
Section : 20 - Controls and Instruments
Front Console Switches and Controls
Steering Column, Foot Operated Controls and Switches
Right-Hand Console Controls-Open Operator's Station
Right-Hand Console Controls-Cab
Gauges and Indicator Lights
Heater and Air Conditioner Controls-Cab
External Rear Hitch Raise/Lower Switches-If Equipped
Section : 25 - Lights
Light Location
Transport, Work And Warning Lights
Turn Signal Lights
Brake Light-If Equipped
Auxiliary Driving Lights-If Equipped
Implement/Trailer Outlet
Rotary Beacon Light-If Equipped
Section : 30 - Operator's Station
Operate Foldable ROPS
Adjust Seat-Open Operator's Station
Adjust Seat-Deluxe Open Operator's Station
Adjust Seat Arm Rests
Use Seat Belt
Adjust Steering Wheel Tilt and Height
Section : 35 - Operator's Station-Cab
Door and Windows
Adjust Seat-Mechanical Suspension
Adjust Seat-Air Suspension (If Equipped)
HVAC Blower Speed
HVAC Temperature
Defrost Windshield
Air Conditioner and Heater Performance
Windshield Wiper and Washer
Rear Window Wiper and Washer-If Equipped
Use Dome Light
Right-Hand Console Control Illumination Light
Monitor Installation
Use Instructional Seat-If Equipped
Accessory Electrical Outlet-If Equipped
Use Auxiliary Power Strip-If Equipped
Use Field Office-If Equipped
Operating Radio (AM/FM)
Operating Radio with Compact Disc Player (If Equipped)
Operating Compact Disc Player (If Equipped)
Setting Alarm
Setting Clock
Section : 40 - Break-In Period
Observe Engine Operation
Break-In Service
Section : 45 - Prestart Checks
Service Daily Before Start-Up
Section : 50 - Operate Engine
Before Starting the Engine
Operate Key Switch
Start Engine
Cold Weather Start Aid
Engine Block Coolant Heater-If Equipped
Check Engine Indicators and Gauges
Change Engine Speeds
Recommended Engine Speeds and Operational Procedures
Stop Engine
Use Booster Battery or Charger
Section : 55 - Drive and Transport Tractor
Front End Ballast
Safety Chain
Road Transportation
Operate SyncShuttle Plus™ Transmission
Ground Speed Estimates-SyncShuttle Plus™ Transmission
Operate SyncReverser™ Transmission or PowrReverser™ Transmission
Ground Speed Estimates-SyncReverser™ Transmission and PowrReverser™ Transmission
Operate PowrReverser Plus™ Transmission
Ground Speed Estimates-PowrReverser Plus™ Transmission
Use PowrReverser™ Modulation-If Equipped
Select a Gear
Correction Factors for Other Tire Sizes
Creeper Gear Operation
Ground Speed Estimates-Transmission with Creeper
Brake Operation
Differential Lock Operation
Mechanical Front-Wheel Drive Operation-with Auto Engage and Brake Assist-If Equipped
Mechanical Front-Wheel Drive-Electrohydraulic Control-If Equipped
Stop Tractor
Transport on Carrier
Tow Tractor
Section : 60 - Rear Hitch Controls
Operate Mechanical Position Control-If Equipped
Operate Mechanical Draft Control-If Equipped
Operate Mechanical Rate of Drop Control-If Equipped
Operate Electrohydraulic Draft Control-If Equipped
Operate Electrohydraulic Rate of Drop Control-If Equipped
Operate Electrohydraulic Height Limit Control-If Equipped
Operate Electrohydraulic Position Control-If Equipped
Electrohydraulic Hitch System Indicator-If Equipped
Operate External Position Control-If Equipped
Operate Manual Lower for Electrohydraulic Hitch-If Equipped
Section : 65 - 3-Point Hitch
Match Tractor Power to Implement
3-Point Hitch Components
Prepare Implement
Convert Category II Hitch to Category I
Position Center Link
Attach Implements to 3-Point Hitch
Adjust Hitch Side Sway
Level Hitch
Adjust Lateral Float
Section : 70 - Hydraulic System Controls and Operations
Rear SCV Control Lever and Coupler Identification
Mid-Mount SCV Control Lever and Coupler Identification-If Equipped
Use Correct Hose Tips
Connect or Disconnect High-Pressure Hoses
Connect Cylinder Hoses to Rear SCV
Connect Cylinder Hoses to Mid SCV-If Equipped
Connect and Operate Single-Acting Cylinder
Operate Rear SCV Control Levers
Operate Rear SCV Control Levers and Set Detents-Deluxe Valves
Use Deluxe Rear SCV to Operate Hydraulic Motor
Use Rear SCV to Provide Power Beyond Oil
Use Rear SCV to Operate Loader
Operate Mid SCV Multi-Function Control Lever-If Equipped
Adjust Flow Control-Rear SCV and Mid SCV-If Equipped
Correct Reversed Cylinder Response
Warm Transmission-Hydraulic System Oil
Use Rear SCV Oil Collection Tank-If Equipped
Use Hydraulic Power Beyond Coupler-If Equipped
Use Hydraulic Motor Case Drain Connection-If Equipped
Use Fast Return-to-Sump Connection
Section : 75 - Drawbar and PTO
Match Tractor Power to Implement
Observe Drawbar Load Limitations
Select Drawbar Position
Adjust Drawbar Length and Offset
Attach PTO-Driven Implement
Select Correct PTO Speeds-If Equipped
Reverse 540/1000 RPM PTO Shaft-If Equipped
Operate PTO
Section : 80 - Performance Ballast
Plan for Maximum Productivity
Select Ballast Carefully
Use Cast Iron Weights
Install Rear Cast Iron Weights-If Equipped
Use Implement Codes
Section : 85 - Storage
Tractor Storage
Remove Tractor from Storage
Section : 90 - Troubleshooting
Engine
Transmission
Hydraulic System
Brakes
3-Point Hitch
Selective Control Valves (SCV)
Remote Hydraulic Cylinder
Electrical System
Heater and A/C System (Cab)
Wipers, Work Lights, Dome Light and Radio (Cab)
Section : 95 - Specifications
Machine Specifications
Drain and Refill Capacities
Machine Weights-Open Operator's Station (OOS), Deluxe Open Operator's Station, Cab
Permissible Load Specifications
Metric Bolt and Screw Torque Values
Unified Inch Bolt and Screw Torque Values
Limited Battery Warranty
Section : 100 - Identification Numbers
Identification Numbers
Record Tractor Identification Number
Record Front Axle Serial Number
Record Engine Serial Number
Record Transmission Serial Number
Record Cab Serial Number
Keep Proof of Ownership
Keep Machines Secure
Section : 105 - Maintenance and Service Intervals
Service Interval Chart
Service Interval Chart
Service-As Required
Section : JDSLA - John Deere Service Literature Available
Technical Information
John Deere Is At Your Service