533, 583, 633, 653, 663, 683, 753 Loaders and 746 Loader (005000- )
Copyright 2008 (c) Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Predelivery Inspection
Section : 00 - Identification Views
533, 583, 633, 653, 663, 683 and 753 Loader Identification View
746 Loader Identification View
Section : 05 - Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Wear Protective Clothing
Check Machine Safety
Protect People and Animals
Avoid Injury or Death from Rollover Accidents
Operating Non-Self-Levelling Loaders
Avoid Injury or Death from Falling Loads
Operating Loader with Implements from Other Manufacturers
Avoid Power Lines
Dig Safely
Detach Loader Safely
Use Safety Lights and Devices
Practice Safe Maintenance
Service Loader Safely
Service Machines Safely
Store Attachments Safely
Avoid Heating Near Pressurized Fluid Lines
Avoid High-Pressure Fluids
Service Accumulator Systems Safely
Remove Paint Before Welding or Heating
Avoid High-Pressure Jet on Safety Decals
Avoid High-Pressure Jet on Cylinders
Dispose of Waste Properly
Section : 10 - Safety Decals
Pictorial Safety Signs
Operator's Manual
Protect People and Animals
Avoid Injury or Death from Falling Load
Falling Round Bales
Shock Absorbers
Operator's Warning Decal (Australia only)
Section : 15 - Abbreviations
Abbreviations
Section : 20 - Application Charts
Approved Loaders for 30, 40, 50 and 55 MFWD Series Tractors
Approved Loaders for 3000 and 3010 MFWD Series Tractors
Approved Loaders for 3000 and 3010 2WD Series Tractors
Approved Loaders for 5605 and 5705 MFWD Series Tractors
Approved Loaders for 5000 and 5010 2WD and MFWD Series Tractors
Approved Loaders for 5015 2WD and MFWD Series Tractors
Approved Loaders for 5020 MFWD Series Tractors
Approved Loaders for 5000R MFWD Series Tractors
Approved Loaders for 6000, 6010 and 6020 MFWD Series Tractors
Approved Loaders for 6000, 6010 and 6020 2WD Series Tractors
Approved Loaders for 6030 MFWD Series Tractors
Approved Loaders for 6030 2WD Series Tractors
Approved Loaders for 7000 and 7010 MFWD Series Tractors
Approved Loaders for 7020 MFWD Series Tractors
Approved Loaders for 7030 MFWD Series Tractors
Approved Front Tires on 3000 and 3010 Series Tractors
Approved Front Tires on 5605 and 5705 Series Tractors
Approved Front Tires on 5000 and 5010 Series Tractors
Approved Front Tires on 5015 Series Tractors
Approved Front Tires on 5020 Series Tractors
Approved Front Tires on 5000R Series Tractors
Approved Front Tires on 6000, 6000 SE, 6010 and 6010 SE Series Tractors
Approved Front Tires on 6020 and 6020 SE Series Tractors
Approved Front Tires on 6030 Series Tractors
Approved Front Tires on 7000 and 7010 Series Tractors
Approved Front Tires on 7020 MFWD Series Tractors
Approved Front Tires on 7030 MFWD Series Tractors
Section : 30 - Preparing the Tractor
Setting Valves (Loader Operated from SCV, ESCV, EHSCV and EHICV)
Checking Front Tire Pressure
Checking Front Wheel Bolts
Removing Front Weights
Adjusting Front Tread (40 and 50 Series Tractors)
Adjusting Front Tread (3000 and 3010 Series Tractors)
Adjusting Front Tread (5000, 5605, 5705, 5010 and 5015 Series Tractors)
Adjust Front Tread (5020, 5000R, 6000, 6010, 6020 and 6030 Series Tractors)
Adjusting Front Tread (7000 and 7010 Series Tractors)
Adjusting Front Tread (7020 Series Tractor)
Adjusting Front Tread (7030 Series Tractor)
Adjusting Rear Tread of Tractor
Ballasting Tractor with Loader
Rear Ballast for Tractor with 533 Loader
Rear Ballast for Tractor with 583 Loader
Rear Ballast for Tractor with 633 Loader
Rear Ballast for Tractor with 653 Loader
Rear Ballast for Tractor with 663 Loader
Rear Ballast for Tractor with 683 Loader
Ballasting Tractor with 753 Loader
Ballasting Tractor with 746 Loader
Section : 35 - Break-In Period
Checking Front Wheel Bolts
Checking Mounting Frame Hardware
Section : 40 - Attaching/Detaching the Loader
Attach 533, 583, 633, 653, 663, 683 and 753 Loaders
Attach 746 Loader
Detach 533, 583, 633, 653, 663, 683 and 753 Loaders
Detaching 746 Loader
Section : 45 - Attaching/Detaching Implements
Attaching Implements
Detaching Implements
Section : 50 - Operating the Loader
Loader Operation Speed Limit
Driving on Public Roads
Parking the Tractor with the Loader
Operating the Loader with Selective Control Valves
Operating the Loader with Multi-Function Lever
Operating Loader with COMMANDARM™ Controls
Operating 3rd and 4th Functions with 2-Function Independent Control Valve and Diverter
Operating 3rd and 4th Functions with 3-Function Independent Control Valve
Operating the Loader with Armrest-Integrated Multi-Function Lever
Operating 3rd and 4th Functions with Armrest-Integrated Multi-Function Lever
Gear Shift Switches on the Multi-Function Lever (Tractor with POWRQUAD™ Plus and AutoQuad Transmission)
Lock and Unlock Multi-Function Lever
Improving Access Through the Right-Hand Door
Working and Storage Positions of Swing-Away Multi-Function Lever
Raising and Lowering the Loader
Operating Safety Device (if Equipped)
Adjusting Implement Level Indicator
Operating MEMOSYSTEM™ (if equipped)
Removing Material from a Pile
Digging
Levelling and Scraping Forward
Levelling in Reverse
Operating Loader Suspension (if equipped)
Hydraulic Self-Levelling Cylinder Positions (583, 633 and 653 HSL Loaders)
Section : 51 - Operating Bale Fork, Gripper and Elevator
Avoiding Injury or Death from Rollover Accidents
Avoiding Injury or Death from Falling Round Bales
Transporting a Round Bale
Operating Round Bale Fork
Operating the Round Bale Gripper and Clamper
Operating the Round Bale Elevator
Handling Round Bale by Its Curved Surface
Handling Round Bale by Its Ends
Storing the Round Bale Elevator
Section : 55 - Implements
Standard Bucket
Earth Bucket
Heavy-Duty Bucket
Teeth for Heavy-Duty Buckets
Replaceable Wear Edge for Heavy-Duty Bucket
High-Volume Bucket
Grain Bucket
High-Dump Bucket
Standard Multi-Purpose Bucket
Heavy-Duty Multi-Purpose Bucket
Grapple for Heavy-Duty Multi-Purpose Bucket
Standard Manure Fork
Standard Manure Fork with Grapple
Heavy-Duty Manure Fork
Heavy-Duty Manure Fork with Grapple
Pallet Fork
Bale Spike
Combi Frame Pallet Fork and Bale Spike
Round Bale Gripper
High Capacity Bale Gripper
Articulated Bale Clamper
Round Bale Elevator
Double Frame Bale Elevator
Rear Ballast Box
Tractor Hood Guards
Section : 60 - Lubrication And Maintenance
Observe Service Intervals
Grease
Alternative and Synthetic Lubricants
As Required - Auto-Latch Device
Every 10 Hours - 533, 583, 633, 653, 663 and 683 Loaders
Every 10 Hours - 753 Loader
Every 10 Hours - 746 Loader
Every 10 Hours - High-Dump Bucket
Every 10 Hours - Round Bale Gripper, High Capacity Bale Gripper and Round Bale Clamp
Every 10 Hours - Articulated Bale Clamper
Every 10 Hours - Round Bale Elevator and Double Frame Bale Elevator
Every 10 Hours - Heavy-Duty Manure Forks with Grapple
Every 10 Hours - Standard Manure Forks with Grapple
Every 10 Hours - Standard Multi-Purpose Bucket
Every 10 Hours - Heavy-Duty Multi-Purpose Bucket with Grapple
Every 50 Hours - Check Mounting Frame Hardware (3000 and 3010 Series Tractor)
Every 50 Hours - Check Mounting Frame Hardware (5000, 5605, 5705, 5010 and 5015 Series Tractors)
Every 50 Hours - Check Mounting Frame Hardware (5020 Series Tractor)
Every 50 Hours - Check Mounting Frame Hardware (5000R Series Tractor)
Every 50 Hours - Check Mounting Frame Hardware (6000, 6010, 6020 and 6030 Series Tractor)
Every 50 Hours - Check Mounting Frame Hardware (7000 and 7010 Series Tractor)
Every 50 Hours - Check Mounting Frame Hardware (7020 Series Tractor)
Every 50 Hours - Check Mounting Frame Hardware (7030 Series Tractor)
Every 100 Hours or Monthly - Hydraulic Hoses
Every 3 Years - Accumulators
Every 6 Years - Hydraulic Hoses
Every 10 Years - Accumulators
Section : 65 - Troubleshooting
General Troubleshooting
Bucket Troubleshooting
Section : 70 - Service
Metric Bolt and Screw Torque Values
Unified Inch Bolt and Screw Torque Values
Use Genuine John Deere Parts
Servicing Loader and/or Tractor Safely (Loader Attached)
Shut-Off Valve (533, 583, 633, 653, 663, 683 and 753 Loaders)
Adjusting MEMOSYSTEM™ Sensor
Adjust Hydraulic Self-Levelling Cylinders (583, 633 and 653 HSL Loaders)
Identifying Hose Connections on 533, 583, 633, 653, 663, 683 and 753 Loaders
Identifying Hose Connections on 746 Loader
Identifying Hose Connections on 746 Loader Mid-Mount Bracket
Identifying Hose Connections on 7020 Tractors Mid-Mount Valve
Identifying Hose Connections on Individual Couplers
Identifying Connections on Multi-Coupler
Replacing Hydraulic Components
Loader Hanging Points
Section : 75 - Storage
Preparing Loader for Storage
Storing the Loader
Section : 80 - Specifications
Rated Operating Load
Non Self-Levelling Loader Specifications1
Mechanical Self-Levelling Loader Specifications1
Hydraulic Self-Levelling Loader Specifications1
746 MSL Specifications1
Declaration of Conformity
Section : 85 - Serial Numbers
Serial Number
533, 583, 633, 653, 663, 683 and 753 Loaders Serial Number Plate Description
Record 533, 583, 633, 653, 663, 683 and 753 Loaders Serial Number
Record 746 Loader Serial Number
Loader Front-End Implement Identification Number
Keep Proof of Ownership
Keep Machines Secure
Section : IBC - John Deere Keeps You On The Job
John Deere Parts
The Right Tools
Well-Trained Technicians
Prompt Service