Material Collection System 14-Bushel Dump
From Seat
Copyright 2016 © Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Using Your Operator’s Manual
Section 00 - Product Identification
Product Compatibility
Record Identification Numbers
Section 05 - Safety Labels—Text
Understanding The Machine Safety Labels
Danger
Warning/Caution
Warning
Warning
Section 06 - Safety Labels—No Text
Understanding The No-Text Machine Safety Labels
Avoid Injury From Rotating Blades and Thrown Objects
Avoid Injury From Thrown Objects, Ballast Per Operator Manual
Avoid Injury to Hands and Fingers
Avoid Injury From Rotating Belts
Section 10 - Safety
Read Safety in Machine Operator’s Manual
Operating Safely
Parking Safely
Protect Children
Avoid Injury From Thrown Objects
Avoid Injury From Rotating Blades
Practice Safe Maintenance
Section 15 - Preparing Vehicle
Hopper Parts List
Assemble Exhaust Shield to Tail Pipe
Remove Drive Wheels
Install Frame Brackets
Install ROPS Mounting Pin
Install Front Ballast Bracket
Install Wiring Harness (Front)
Installing Drive Wheels
Section 20 - Assembly
Blower Assembly Parts List
Install Sheaves
Install Brackets for Mower Deck Sheave Cover
Assemble Blower
Assemble Lower Chute
Install New Gate (Mulch on Demand Mower Decks Only)
Install Bracket Assembly for all Mulch on Demand Decks.
Installing Rear Blower Bracket
Install Mulch-On-Demand Position Lever (Mulch on Demand Mower
Decks Only)
Trim Discharge Chute
Tighten Hardware and Adjust Belt
Hopper Parts List
Prepare Hopper For Installation
Install Hopper Assembly Onto Hopper Frame
Section 25 - Installing
Install Assembly Onto Machine
Installing Blower
Installing Sheave Cover
Installing Chute
Installing Proper Mower Blades
Installing Ballast
Checking Tire Pressure
Section 30 - Removing and Storing
Removing Hopper Chute
Removing Hopper Assembly
Removing Blower
Removing Ballast
Storing Attachment
Section 35 - Operating
Mounting and Dismounting Machine With MCS Installed
Using the Blower
Unplugging Mower, Hopper, or Material Collection System
Raising and Lowering the Hopper
Transporting
Section 40 - Service Intervals
Servicing Your Attachment
Section 45 - Service
Cleaning Hopper Exhaust Screen
Tilt for Service
Grease Locations
Removing Drive Belts
Installing Drive Belts
Adjust Primary Belt Tension
Adjust Secondary Belt Tension
Section 47 - Adjustments
Hopper Elbow
Hopper Door
Section 50 - Troubleshooting
Using Troubleshooting Chart
Section 55 - Specifications
Specifications
Section GQS - Getting Quality Service
Service Literature
Parts
John Deere Quality Continues with Quality Service