StarFire iTC and RTK

All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.

www.StellarSupport.com

Section : 05 - Safety

Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Prepare for Emergencies
Practice Safe Maintenance
Handle Global Positioning Receivers and Brackets Safely

Section : 10 - StarFire iTC Receiver

StarFire iTC Receiver

Section : 15 - GS2 Display-StarFire iTC

STARFIRE ITC softkey
INFO tab
SETUP tab
Correction Mode
Correction Frequency
Mount Direction
Fore/Aft
Height
QuickStart
Hours On After Shutdown
TCM Calibration
Enable Optimized Shading
ACTIVATIONS tab
SERIAL PORT tab
NMEA Strings
SATELLITE INFORMATION softkey
DIAGNOSTIC softkey
READINGS tab
DATA LOGS tab
RADIO SELF TEST tab
StarFire Signal Monitoring System

Section : 20 - GS2 Display-RTK

RTK softkey
Vehicle
Vehicle Repeater
Quick Survey Mode
Absolute Base Mode
RTK Network Configuration
Shared Base Station RTK Security
Shared Base Station Security-Setup
RTK Vehicle Security Status

Section : 25 - Original GreenStar Display-StarFire iTC

Auto-Update
Manual Software Update
StarFire Receiver
SETUP-GPS-PAGE 1
Overview:
SF2/RTK Activations,
SF2 Subscription

QuickStart Setup
Setup-TCM
ON/OFF-TCM
Mounting Direction-TCM
Calibrate Level-TCM
Height-TCM
Fore/Aft-TCM
Differential Correction Setup
Serial RS232 Output
Hours On After Shutdown
INFO - GPS - PAGE 1
INFO - GPS - PAGE 2
Data Log
INFO - GPS - PAGE 3
Satellite Tracking

Section : 30 - Original GreenStar Display-RTK

Operating Mode
Vehicle Repeater
Quick Survey Mode
Absolute Mode
Shared Base Station RTK Security
Radio Channel
Network ID
Repeater
Operating Vehicle
INFO Pages, Base Station
INFO Pages, Vehicle

Section : 35 - RTK Base Station Setup

System Overview
Installation of the RTK radio and antenna
Attaching RTK Harness
RTK Network Base Station Setup
Multipathing
RTK using Straight, Curves or Circle
Example A
Operating Parameters
PDOP Definition
PDOP Operating Values
StarFire Signal Monitoring System
Antenna Height
Specific Tower Setup Information
Utilizing Both The 91 m (300 ft) RTK Extension Harness And Low Loss Coax Cable
Utilizing The RTK Extension Harness
Utilizing A Repeater
Utilizing Just Low Loss Coax Cable
Leaving The Radio And Receiver As A Single Unit

Section : 40 - Troubleshooting and Diagnostics

Accessing GREENSTAR 2 Diagnostic Addresses
Accessing Original GREENSTAR Display Fault Codes
STARFIRE iTC Diagnostic Addresses
Fault Codes-StarFire iTC
Diagnostic Trouble Codes-StarFire iTC
GreenStar Deluxe - Diagnostic Readings
Radio Self Test

Section : 45 - Specifications

Unified Inch Bolt and Screw Torque Values
Metric Bolt and Screw Torque Values
Technical Information
John Deere Is At Your Service