925D, 930D and 936D Draper Platforms
Copyright 2000 (c) Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Section : 05 - Platform Safety Features
Link
Section : 10 - Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Wear Protective Clothing
Park Machine Safely
Avoid Contact With Moving Parts
Avoid Contact With Cutterbar
Transport Safely
Use Safety Lights and Devices
Remove Paint Before Welding or Heating
Avoid Heating Near Pressurized Fluid Lines
Section : 15 - Safety Sign Location
Link
Section : 20 - Attaching and Detaching
Attaching Platform to Combine
Detaching Platform from Combine
Section : 25 - Transporting
Transporting Platform on Combine
Preparing Platform for Transport (If Equipped with Slow Speed Integral Transport System)
Preparing Platform for Field Operation (If Equipped with Slow Speed Integral Transport System)
Section : 30 - Operating the Platform
General Information
Draper Belt Speed
Reel Settings
Feed Drum Settings
Gauge Wheel Settings
Harvesting in Dry Crop Conditions
Harvesting in Tough Feeding Crop Conditions
Harvesting in Short, Thin Crops
Harvesting in Down Crops
Bushy/High Volume Crops
Sorghum
Recommended Combine Settings
Recommended Initial Crop Settings
Seed Loss Chart
Section : 35 - Attachments
Crop Lifters (Optional)
Crop Lifter Installation
Crop Lifter Adjustments
Divider Point Options
Divider Point Plate
Vertical Divider Point Rod
Winged Divider Point (Optional)
Skid Shoes
Section : 40 - Calibration Procedures
Header Calibration
Section : 45 - Active Header Control (AHC)™ Operation
Active Header Control (AHC) Display (Optional on 50 Series Combine)
Header Height Resume
Section : 50 - Adjustments - Suspension and Leveling
Leveling Platform Suspension
Leveling Draper Cutterbar to Ground
Section : 55 - Adjustments - Feeding Related
Platform Adjustment-Feeding
Adjusting Cutterbar Tilt
Adjusting Feed Drum Finger Timing
Adjusting Drum Height
Adjusting Draper Side Belt Position
Adjusting Draper Side Belt Tension
Adjusting Draper Center Belt Tensioner
Removing Sump Pan
Section : 60 - Adjustments - Reel
Setting Reel Safety Stops
Adjusting Minimum Reel Height and Leveling Reel
Rephasing Reel Lift Cylinders
Bleeding the System
Finger Pickup Settings
Manual Adjustment of Reel Fore/Aft
Hydraulic Adjustment of Reel Fore/Aft (Optional)
Fore/Aft Cylinder Mount Adjustments
DIAL-A-SPEED™ (Attachment)
Speed Ratio Sensor Adjustment
Section : 65 - Adjustments - General
Knife Hold-Down Clearance
Adjusting Air Bag Pressure (Optional)
Section : 70 - Adjustments - Windrow Conversion
Windrow Conversion
Conversion to Windrowing (930D With Split-Belt Windrow Option)
Conversion To Windrow (936D With Split-Belt Windrow Option)
Conversion to Windrowing (936D With Regular Belts)
Section : 75 - Lubricants
Draper Main Gearbox
Grease
Lubricant Storage
Alternative and Synthetic Lubricants
Section : 80 - Lubrication and Maintenance
Lubricate Draper Main Gearbox
Lubrication Symbols
Link
Section : 85 - Service
Hydraulic Cylinder Safety Stop
Setting Reel Safety Stops
Reel Drive Gear Adjustment
End Covers Removal
End Cover Installation
Guard Replacement
Left-Hand End Guard Replacement
Right-Hand End Guard Replacement
Replacing Cutterbar Knife
Knife Section Service Kit
Replacing Knife Sections
Aligning Knife Head and Knife Drive Alignment
Cleaning Material Build Up at End Covers
Replacing Cutterbar Drive Belt
Side Draper Belt Replacement
Center Draper Belt Replacement
Header Warning Light Bulb Replacement
Spare Knife Storage (Optional)
Feed Drum Finger Guide and Cap Replacement
Feed Drum Finger Replacement
Section : 90 - Storage
End of Season Service
Beginning of Season Service
Section : 95 - Troubleshooting
Cutting Platform
Section : 100 - Specifications
Overall Dimensions
Gauge Wheel Tire Pressure
Speeds and Feeds
Cutterbar
Platform Weights
Header Identification Number
Section : 105 - Crime Prevention Tips
Help Prevent Crime
Record Identification Numbers
Keep Proof of Ownership
Park Indoors Out of Sight
When Parking Outdoors
Reduce Vandalism
Report Thefts Immediately
Technical Information
John Deere Is At Your Service When You Need It