GREENSTAR™ Yield Monitor System and Yield Mapping System
Copyright 2002 (c) Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Predelivery Inspection
Section : 05 - Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Look for Supplemental Information
Keep Riders and Children Off Machine
Prepare for Emergencies
Handle Chemical Products Safely
Stay Clear of Header
Keep Hands Away From Knives
Practice Safe Maintenance
Prevent Machine Damage When Welding
Remove Paint Before Welding or Heating
Avoid Heating Near Pressurized Fluid Lines
Avoid Contact With Moving Parts
Avoid High-Pressure Fluids
Protect Against High Pressure Spray
Dispose of Waste Properly
Section : 10 - GREENSTAR™ Component Location
GREENSTAR™ Display
Mass Flow Sensor
Moisture Sensor
Integrated Printer (Option)
Position Receiver
Mobile Processor and PC Card
Section : 15 - Maintenance and Service
Mass-Flow Sensor (CWS/WTS/STS Combine)-Every 50 Hours
Mass Flow Sensor (CTS Combine)-Every 50 Hours
Mass Flow Sensor (2200 Series Combines)-Every 50 Hours
Moisture Sensor-Every 50 Hours
Adjusting Clean Grain Elevator Chain-As Required
Changing Printer Paper Roll-As Required
Changing Printer Ink Ribbon-As Required
Section : 20 - Yield Monitor Display and Keypad
General Information
Contrast Button
Before You Start
Section : 25 - Yield Monitor Run Functions
Yield Monitor RUN Chart
Yield Monitor RUN Screens
RUN - Yield Mon - PAGE 1
Recording
Run - Yield Mon - PAGE 2
Cut Width (Reducing Working Width)
Average Moisture and Weight
Section : 30 - Yield Monitor SETUP Functions
Yield Monitor SETUP Chart
Yield Monitor SETUP Screens
Yield Monitor SETUP Functions
SETUP - Yield Mon - PAGE 1
Crop
Farm
Field
Header Type
Header Width
Row Spacing
Adjust Moisture Correction
Moisture Correction
Adjust Fixed Moisture Value
Fixed Moisture Value
SETUP - Yield Mon - PAGE 2
Calibration
Standard Calibration Procedure
Optional Low Flow Compensation Procedure
Manual Adjustment of Calibration Factor
SETUP - Yield Mon - PAGE 3
Record Stop Delay (CTS up to SN 070230 and 2200 Series Combines)
Record Stop Height (CTS from SN 070231, CWS, STS and WTS)
Crop Region
SETUP - Yield Mon - PAGE 4
GREENSTAR Display
SETUP - Display - PAGE 2
System Settings
Country Code
Language
RUN Page Layout
Section : 35 - Yield Monitor Information Functions
Yield Monitor Info Functions
Yield Monitor INFO Screens
INFO Screen
INFO - Menu - PAGE 1
INFO - Yield Mon - PAGE 2
Field Totals (Without Printer Option)
INFO - Yield Mon - PAGE 2
Field Totals (With Printer Option)
INFO - Yield Mon - PAGE 3
Crop Totals (Without Printer Option)
INFO - Yield Mon - PAGE 3
Crop Totals (With Printer Option)
INFO - Diagnostics - PAGE 1
Moisture Sensor
INFO - Diagnostics - PAGE 2
Mass Flow Sensor
INFO - Diagnostics - PAGE 3
INFO - GREENSTAR Display
INFO - Tracking
Section : 40 - Yield Mapping Display and Keypad
General Information
Contrast Button
Before You Start
Install and Reprogram GREENSTAR System from Field Documentation or Parallel Tracking to Yield Mapping
Section : 45 - Yield Mapping Run Functions
Yield Mapping RUN Functions
Yield Mapping RUN Screens
RUN - Yield Map - PAGE 1
GPS
Recording
Flags
Turn Flags On or Off From RUN - Flags - PAGE 1
Turn Flags On or Off From RUN - Yield Map - PAGE 1
Creating New Flags From The Combine
RUN - Yield Map - PAGE 2
Cut Width (Reducing Working Width)
Average Moisture and Weight
Section : 50 - Yield Mapping Setup Functions
Yield Mapping Setup
Yield Mapping SETUP Screens
Yield Mapping Setup Functions
SETUP - STARFIRE or Position Receiver
Renew License
Changing Output Rate
Serial Port Baud Rate
Changing Channel Frequency
SETUP - Yield Map - PAGE 1
Crop
Farm
Field
Header Type
Header Width
Row Spacing
Adjust Moisture Correction
Moisture Correction
Adjust Fixed Moisture Value
Fixed Moisture Value
SETUP - Yield Map - PAGE 2
Calibration
Standard Calibration Procedure
Optional Low Flow Compensation Procedure
Manual Adjustment of Calibration Factor
SETUP - Yield Map - PAGE 3
Record Stop Delay (CTS up to SN 070230 and 2200 Series Combines)
Record Stop Height (CTS from SN 070231, CWS, STS and WTS)
Field Locator
Crop Region
SETUP - Yield Map - PAGE 4
GREENSTAR Display
System Settings
Country Code
Language
SETUP - Display - PAGE 2
Run PAGE Layout
Section : 55 - Yield Mapping Information Functions
Yield Mapping Info Functions
Yield Mapping INFO Screens
Yield Mapping INFO Functions
INFO - GPS - PAGE 1
INFO - GPS - PAGE 2
Corrections Receiver
INFO - GPS - PAGE 3
Satellite Tracking
Warning Screens
INFO - Menu - PAGE 1
INFO - Yield Map - PAGE 2
Field Totals
INFO - Yield Map - PAGE 3
Crop Totals
INFO - Yield Map - PAGE 2
Field Totals (Without Printer Option)
INFO - Yield Map - PAGE 2
Field Totals (With Printer Option)
INFO - Yield Map - PAGE 3
Crop Totals (Without Printer Option)
INFO - Yield Map - PAGE 3
Crop Totals (With Printer Option)
INFO - Diagnostics - PAGE 1
INFO - Diagnostics - PAGE 2
INFO - Diagnostics - PAGE 3
INFO - Diagnostics - PAGE 4
INFO - Diagnostics - PAGE 5
INFO - Reprogram
INFO - Display - PAGE 1
Section : 60 - Yield Calibration
Calibration
Standard Calibration Procedure
Optional Low Flow Compensation Procedure
Manual Adjustment of Calibration Factor
Section : 65 - Load Software
INFO - Software
Load New Software
Section : 70 - Troubleshooting
Moisture Sensor
Mass Flow Sensor
GREENSTAR Display
Mobile Processor
Position Receiver
Display Screen Troubleshooting Illustrations
Display Screens
Section : 75 - Specifications
Standard Payable Moisture Chart For North-American Crops
Standard Payable Moisture Chart For European Crops
Standard Weights
Metric Bolt and Cap Screw Torque Values
Unified Inch Bolt and Cap Screw Torque Values
Safety Note Regarding the Subsequent Installation of Electrical and Electronic Appliances and/or Components
Declaration of Conformity
Section : 80 - Machine Identification Numbers
Identification Labels
Mobile Processor Serial Number
GreenStar™ Display Serial Number
Moisture Sensor Serial Number
Mass Flow Sensor Serial Number
Position Receiver Serial Number
Printer Serial Number
John Deere Parts
The Right Tools
Well-Trained Technicians
Prompt Service