724, 732 and 740 Trailed Crop Sprayers
Copyright 2005 (c) Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Predelivery Inspection
Section : 00 - Identification Views
Identification Views
Section : 01 - Introduction to the Machine
Standard Machine and Accessories
Accessories
Auxiliary equipment/information
Section : 05 - Safety
Admissible Use
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Keep Riders Off Machine
Prepare for Emergencies
Use of Safety Lighting and Provisions
Protect Against High Pressure Spray
Chemical Safety
Prevent Development of Micro Organisms
Danger Symbols
Mechanical Safety
Non-Permissible Use
Operators
Working Area
Means of Personal Protection
Respiratory Protection
Skin Protection
Maintenance of Means of Personal Protection
Tractor Cab
Safety During Maintenance Work
Avoid High-Pressure Fluids
Section : 10 - Safety Decals
Pictorial Safety Signs
User Documentation
Turn Off the Engine
Working with High Pressure
Spray Boom Locking
Danger of Poisoning
Passengers
Drawbar Buckling Point
Danger Point of Spray Booms
Clean Water
Caution with Moving Parts
Maximum PTO Shaft Speed
Spray Boom Hinge Points
Spray Boom Swinging Piece
Means of Personal Protection
Dangerous Substances
Chemical Inductor
Tank Drain
Spray Boom Movement Range
Transport Position
Risk of Explosion
Chocks
Platform Ladder
Boom Support
Maximum Working Pressure
Section : 15 - Preparing the Tractor
General
Operation of Hydraulic Functions
Vertical Load
EL-4 Electrical Operation - Diagram
Power Supply
Fitting Electrical Socket to Tractor
Steering Drawbar Pivot
Lower Linkage Steering Drawbar Automatic Tracking System Assembly
Upper Linkage Steering Drawbar Automatic Tracking System Assembly
Section : 20 - Preparing the Machine
P.T.O. Shaft
Pump Oil Level
Suction Line
Lubrication
Section : 25 - Coupling and Uncoupling of the Sprayer
Drawbar Tow Eyes
Coupling to the Tractor
Support Leg
Track Width Adjustment (Fixed Axle)
Reflector Plates
Hydraulic Connection
Coupling Brake Hoses
Electrical Connection
Automatic Tracking
PTO Shaft Connection
Section : 30 - Transport
Public Road
Public Road Travelling Lights
Mechanical Transport Lock
Hydraulic Braking System (Not For Germany)
Pneumatic Braking System
Attachment of Transport Lift Hooks
Section : 35 - Adjustments
Adjusting The Spray Boom Transport Position
Spray Boom Alignment
Adjusting The Anti-Yaw System
Balancing The Spray Boom
Adjusting The Boom Suspension
Adjusting The Automatic Tracking System With Steering Drawbar
Adjusting the Center Position of Steering Drawbar
Section : 40 - Operation of the Machine
Machine Composition
Function Diagram - Sprayer with Single Pump
Function Diagram - Sprayer with Single Pump and Ring Line Circulation System
Solution Tank
Filling Hole
Liquid Level Indicator (Solution Tank)
Agitation
Suction Unit
Pump
Primary Pressure Regulator
Pressure Selection Valve
Circulation Valve
Electrical Operation Group
Control Box
Control Group
Electrical Boom Section Valves
Rinse Tank
Hand Washing Tank
Spray Boom
Boom Suspension System
Boom Tilt Correction
Spray Line and Nozzle Holders
Nozzles
Ring Line Circulation System
Quick Reference Charts for 700 Series Sprayers, Part 1
Quick Reference Charts for 700 Series Sprayers, Part 2
Quick Reference Chart for 700 Series Sprayers with Filling Injector, Part 1
Quick Reference Chart for 700 Series Sprayers with Filling Injector, Part 2
Drawbar
Drawbar Steering
Automatic Tracking Steering Drawbar
Automatic Trailing Functions of EHB-2 Control Box
Axles
Section : 41 - Operation of the Spraying Computer
Control Panel
Spraying Program
Special Functions
Machine Program
Pressure Sensor Calibration
Flow Sensor Calibration
Speed Sensor Calibration
Calibration of Nozzle Flow Rate
Section : 45 - Wheels and Tires
Wheel Load and Tire Pressure
Explanations of Indications on Agricultural Tires
Tires Technical Specifications,
Taurus Soil Saver RC95, 230/95R48 (9.5R48)
Tires Technical Specifications,
Taurus Soil Saver RC95, 270/95R48 (11.2R48)
Tires Technical Specifications,
Taurus Soil Saver RC95, 300/95R46 (12.4R46)
Tires Technical Specifications,
Taurus Soil Saver RC95, 340/85R48 (13.6R48)
Tires Technical Specifications,
Taurus Point 7, 480/70R38
Tires Technical Specifications,
Taurus Point 7, 520/70R38
Tires Technical Specifications,
Kléber Traker, 420/85R38(16.9R38)
Tires Technical Specifications,
Kléber Traker, 520/85R38 (20.8R38)
Section : 50 - Working with the Machine
Nozzle Selection
Adjusting the Nozzle Output
Spray Volume Table
Spraying with Liquid Fertilizers
Nozzle Output in the Case of Field Spraying with Liquid Fertilizers
Liquid Output When Using Drop Hoses
Liquid Output When Using Drop Pipes
Preparing the Spraying Liquid
Filling the Sprayer with Water
Filling with Crop Protection Chemicals
Cleaning the Empty Barrels
Performing Spraying Operation
Processing the Residual Liquids
Cleaning the Machine
Section : 55 - Accessories
Digital Tank Level Indicator
Chemical Inductor with Rinsing Head
Rinsing Head in Filling Opening
Spray Gun For Chemical Inductor
Transport Box for Chemicals
Hose Reel with Washing Brush and Spray Gun
Protective Clothing Locker
Edge Nozzles
OC Nozzle Holders
Foam Marker
Wheel Fenders
Boom Gauging Device
Boom Suspension Kit For Slopes
External Pump Filling Connection
Filling Injector
Transfer Valve To Pump Liquid Back To Store
Ecomatic Filling System
Self-Cleaning Pressure Line Filter
Adjustable Restrictors for Drawbar Steering Cylinders
Hose Reel for Filling Hose
Quick Fill Coupling for Rinse Tank
Drop Hoses
Drop Pipes
Adapter Cable for External Target Rate
Spray Computer Power Supply Cable for Other Equipment
Wiring Harness For Second Tractor
Calibration Container
Section : 60 - Maintenance
Lubrication
Machine Lubricating Nipple Summary
Double-Folding Spray Boom Lubricating Nipple Summary
Triple-Folding Spray Boom Lubricating Nipple Summary
Cleaning
Diaphragms
Malfunctions
Testing of the Machine
Scrap
Metric Bolt and Cap Screw Torque Values
Section : 65 - Storage
Preparation for Storage
Protection Against Frost
Spraying During Frost Periods
First Activation Following Long Inactivity (Storage, Repair, Etc.)
Section : 70 - Specifications
Specifications
Products to be Processed
Materials Applied
Dimensions and Weights
Sound Level
Electrical Connection Requirements
Colour Codes according to DIN 47100
Physical Operating Conditions
Directives and Standards Applied
Declaration of Conformity
Combination Matrix 724 - Part 1 (For Germany Only)
Combination Matrix 724 - Part 2 (For Germany Only)
Combination Matrix 732 - Part 1 (For Germany Only)
Combination Matrix 732 - Part 2 (For Germany Only)
Combination Matrix 740 - Part 1 (For Germany Only)
Combination Matrix 740 - Part 2 (For Germany Only)
Section : 75 - Identification Plates
Basic Machine Identification Plate
Spray Boom Identification Plate
Pump Identification Plate
Section : IBC - John Deere Service Keeps You On The Job
John Deere Parts
The Right Tools
Well-Trained Technicians
Prompt Service