9320T, 9420T, 9520T and 9620T Tractors
Copyright 2006 (c) Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Quick Reference Specifications
Section : 05 - Safety
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Prevent Machine Runaway
Use Seat Belt Properly
Operating the Tractor Safely
Stopping and Parking Tractor
Keep Riders Off Machine
Handle Fuel Safely-Avoid Fires
Prepare for Emergencies
Avoid Trash Build-Up
Handle Starting Fluid Safely
Wear Protective Clothing
Protect Against Noise
Handle Agricultural Chemicals Safely
Avoid Contact with Pesticides
Stay Clear of Rotating Drivelines
Use Safety Lights and Devices
Use a Safety Chain
Freeing a Mired Machine
Transport Towed Equipment at Safe Speeds
Using Caution on Hillsides
Transporting Tractor Safely
Service Cooling System Safely
Practice Safe Maintenance
Support Machine Properly
Remove Paint Before Welding or Heating
Avoid Heating Near Pressurized Fluid Lines
Avoid High-Pressure Fluids
Service Accumulator Systems Safely
Servicing Track Tension Accumulator Safely
Protect Against High Pressure Spray
Handling Batteries Safely
Dispose of Waste Properly
Section : 10 - Safety Signs
Replace Damaged or Missing Safety Signs
Safety Signs
Section : 15 - Controls and Instruments
Front Console
Ignition Switch
Shift and PTO Levers-24-Speed Transmission
Shift and PTO Levers-18-Speed Powershift
Side Console-Standard Cab
Side Console-Deluxe Cab
Corner Post Display
Armrest Controls
Vehicle Monitor Warning System
Vehicle Monitor
Changing Display Functions
Single Beam Radar
Dual Beam Radar
Performance Monitor-If Equipped
Performance Monitor-Data Entry and Saving Mode
Performance Monitor-Adjusting Backlight
Performance Monitor-Service
Performance Monitor-Area, Distance, Area/H, Width, and PTO RPM
Performance Monitor-Operation and Calibration
Performance Monitor-Track Slip
Performance Monitor-Vehicle Speed
Section : 20 - Lights
Operating Lights
Using Delayed Egress Lighting-If Equipped
Use Safety Lights and Devices
Operating Hazard Lights
Operating Turn Signals, Horn, and High/Low Beam
Roof Mounted Field Lights and Entry Light-If Equipped
Extremity Transport Warning Lights
Operating Rotary Beacon Light-If Equipped
Using Seven-Terminal Outlet
Section : 25 - Operator Station
Adjusting Air Suspension Seat
Adjusting Armrest Control
Heated Leather Seat-If Equipped
Operator Presence Sensor
Adjusting Steering Wheel
Controlling Air Flow-Standard
Adjusting Fan Speed-Standard
Controlling Temperature-Standard
Using ClimaTrak® (ATC) -If Equipped (Serial No. -902000)
Using ClimaTrak (ATC) -If Equipped (Serial No. 902001- )
Change ClimaTrak™ (ATC) Unit Display From Fahrenheit to Centigrade
Operating Windshield Wiper and Washer
Operating Rear Windshield Wiper and Washer-If Equipped
Operating the Radio
Operating the Radio with Optional Cassette Tape Player
Operating Radio with Compact Disc Player (If Equipped)
Operating the Optional Cassette Tape Player
Operating Compact Disc Player (If Equipped)
Setting the Clock
Using Field Office-If Equipped
Beverage Cooler
Storage Drawer
Pull-Down Sunshade-If Equipped
GREENSTAR™ System Connections
Using Implement Connector
GREENSTAR™ Plug & Play Connections-Early Version-If Equipped
GREENSTAR™ Plug & Play Connections-Late Version-If Equipped
Using Electrical Outlets
Using Auxiliary Power Strip-If Equipped
Installing Mobile Radio and Antenna-If Equipped
Using Monitor Mounts
Section : 30 - Break-In Period
Break-In Check-First 100 Hours
Break-In Check-After First 100 Hours
Track Systems Break-In
Section : 35 - Operating the Engine
Engine Operation
Starting the Engine
Cold Weather Starting And Operation-Internal Starting Aid
Using Auxiliary Heaters››If Equipped
Operating the Engine
Changing Starting Fluid Can
Using Electric Coolant Heater
Using a Booster Battery or Charger
Section : 40 - Operating the Tractor
Avoiding Contact With Pesticides
Cleaning Tractor of Hazardous Pesticides
Clean Tractor of Trash Build-Up
Using Emergency Exit
Using Seat Belts
Using Instructional Seat
Hydraulic System Warm-Up
Tractor Operation
AutoTrac Steering System
Drive Train Protection-9420T-9520T-9620T
Operating the Transmission-24-Speed POWRSYNC
Shifting the Transmission-24-Speed POWRSYNC
Shifting On-the-Go-24-Speed POWRSYNC
Operating the Transmission-18-Speed Powershift
Shifting the Transmission-18-Speed Powershift
Operating Automatic Powershift (APS)
IMS Functions - Automatic PowerShift (APS)
Using the Brakes
Using Field Cruise and Foot Decelerator
Section : 45 - Implement Management System
Implement Management System (IMS) - Description
Implement Management System (IMS) - Display Codes
IMS Functions - Hitch
IMS Functions - MST Hi-Lo Transmission
IMS Functions - 18-Speed Powershift Transmission
IMS Functions - Automatic PowerShift (APS)
IMS Functions - Selective Control Valves
Operating The Implement Management System (IMS)
Aborting IMS
Clearing IMS Sequence
Section : 50 - Hydraulics and Selective Control Valves
Connecting and Disconnecting Hydraulic Hoses
Using SCV TouchSet Controls and Monitor
Determining Total Flow Demand
Adjusting Selective Control Valve Flow Rate
Adjusting Timed Detent
Using SCV Control Levers
SCV Lever-Neutral Position
SCV Lever-Extend Position
SCV Lever-Extend Detent Position
SCV Lever-Retract Position
SCV Lever-Retract Detent Position
SCV Lever-Float Position
Operator Presence Sensor
Section : 55 - Remote Hydraulic Connections
Using Load-Sensing Hydraulic System-Power-Beyond
Examples Using Load-Sensing Hydraulic System-Power-Beyond
Using Hydraulic Spray Pumps
Standard Hydraulic Component Identification
Implement Connection Example 1-Pressure Control Valve Applications (Grain Drills or Air Seeders with Constant Down-Pressure System)-Less Hitch-Standard Hydraulics
Implement Connection Example 2-Motor Application Using Motor Case Drain-Less Hitch-Standard Hydraulics
Implement Connection Example 3-Closed Center Valve, Pump at High Pressure-Less Hitch-Standard Hydraulics
Implement Connection Example 4-Planter with Vacuum Motor and Return Line to SCV Using Motor Return Tip-Less Hitch-Standard Hydraulics
Implement Connection Example 5-Planter with Vacuum Motor and Return Line to Motor Return-With Hitch-With Lift Assist-Standard Hydraulics
Implement Connection Example 6-Planter with Vacuum Motor and Return Line to Motor Return-With Hitch-Lift Assist-Standard Hydraulics
Using Implement Requiring Large Volumes of Oil
Motor Seal Drain Filter-If Equipped
Section : 60 - Drawbar and PTO
Observing Standard Drawbar Load Limitations
Selecting Drawbar Position
Adjusting Drawbar Side-to-Side
Installing Clevis Assembly
Using Clevis Assembly
Adjusting Wide Swing Drawbar-If Equipped
Installing and Using Clevis Assembly
Heavy-Duty Drawbar Load Limitations-If Equipped
Heavy-Duty Hammer Strap-If Equipped
Attaching PTO-Driven Implement
Using PTO Master Shield-If Equipped
Operating PTO-If Equipped
Section : 65 - Hitch
Hitch Components
Hitch Controls
Using Hitch Control Lever and Raise/Lower Switch
Adjusting Height Limit
Adjusting Rate of Drop
Using External Raise/Lower Switch
Using Hitch Manual Lowering Feature
Using Load/Depth Control
Using Position Control
Using Float Position
Using Draft Control
Using Hitch Slip Command (HSC)
Using Sway Blocks
Attaching Implement to Quick Coupler
Detaching Implement From Quick Coupler
Adjusting Implement Level
Lateral Float
Hitch Conversion-Convertible Quick Coupler
Section : 70 - TouchSet Depth Control
Using TouchSet™ Depth Controls
Attaching Implement and Control System
Checking Depth Control Operation
Detaching Implement
Restoring SCV Control
Section : 75 - Performance Ballasting
General Performance Guidelines
Ballasting for Tractive Performance
Ballast Recommendations
Determining Maximum Ballast
Worksheet to Calculate Ballast Changes
Ballasting Recommendations With Implements
Implement Guidelines
Installing QUIK-TATCH™ Front Weights-If Equipped
Installing QUIK-TATCH Frame Weights-If Equipped
Measuring Track Slip -MANUALLY
Section : 80 - Transport
Driving Tractor On Roads
Use Safety Lights and Devices
Transporting with Ballast
Transport Towed Equipment at Safe Speeds
Using Safety Chain
Towing Tractor-24-Speed POWRSYNC Transmission
Towing Tractor-18-Speed Powershift Transmission
Freeing a Mired Tractor
Transporting on Carrier
Section : 85 - Fuels, Lubricants, and Coolants
Diesel Fuel
Lubricity of Diesel Fuel
Bio-Diesel Fuel
Handling and Storing Diesel Fuel
Fuel Storage
Filling Fuel Tank
Diesel Engine Break-In Oil
Diesel Engine Oil
Extended Diesel Engine Oil Service Intervals
Oil Filters
Diesel Engine Coolant
Operating in Warm Temperature Climates
Additional Information About Diesel Engine Coolants and Supplemental Coolant Additives
OILSCAN™and COOLSCAN™
Transmission/Axle and Hydraulic Oil
18-Speed Powershift Transmission
Grease
Mixing of Lubricants
Alternative and Synthetic Lubricants
Lubricant Storage
Section : 90 - Maintenance and Service Intervals
Observing Service Intervals
Service Interval Chart-Daily or 10 Hours-250 Hours-750 Hours
Service Interval Chart-1500 Hours-2500 Hours-Annual-Two Years-4500 Hours
Raising the Hood
Hood Release Tool
Opening Front Grille
Opening Side Shields
Accessing Batteries
Using High-Pressure Washers
Using Compressed Air
Section : 95 - General Maintenance and Inspection
Checking Neutral Start System
Checking PARK System
Check Dual Beam Radar Sensor
Cleaning and Inspecting Primary Engine Air Filter
Replacing Primary and Secondary Engine Air Filters
Cleaning or Replacing Cab Air Filters
Inspecting Tracks and Undercarriage
Inspect Drive, Mid-Rollers, and Idler Wheels
Replace Mid-Roller-9020T (S.N. 901212-)
Inspect For Track Wear And Trash Build-Up
Service Accumulator Systems Safely
Track Tensioning and Detensioning
Cleaning Grille Screens, Radiator and Oil Cooler
Inspect and Clean Fuel Sump Screen
Servicing the Batteries
Inspect Belt Tensioner
Drive Belt Routings
Checking Manual Brakes
Inspecting Seat Belts
Checking Air Conditioning System
Replace Engine Crankshaft Damper
Replace Transmission Drive Shaft Damper
Section : 100 - Lubrication
Checking Engine Oil Level
Changing Engine Oil and Filter
Checking Transmission/Axle Oil Level
Changing Transmission/Axle Oil-24-Speed POWRSYNC Transmission
Changing Transmission/Axle Oil Filter-24-Speed POWRSYNC Transmission
Changing Transmission/Axle Oil-18-Speed Powershift Transmission
Changing Transmission/Axle Oil Filter-18-Speed Powershift Transmission
Checking Hydraulic Oil Level
Changing Hydraulic Oil
Changing Hydraulic Filter
Cleaning and Inspecting Hydraulic Reservoir Screen
Changing Hydraulic Reservoir Breather Filter
Changing Steering Pump Filter
Lubricating Hitch Center Link and Lift Links
Lubricating Lift Cylinders and Rockshaft
Lubricating Hitch Sensor
Checking Mid-Frame Rollers and Idler Wheels Oil Level
Checking Idler Wheel Hub Oil Level
Lubricating Tension Cylinder
Lubricating Lower Tension Pivot
Section : 105 - Maintenance-Cooling System
Checking Coolant Level
Testing Coolant
Draining, Flushing, and Refilling Cooling System
Section : 110 - Maintenance-Fuel System
Draining Water Separator
Replacing Fuel Filter
Replacing Fuel Pre-Filter (Early Tractors)
Replacing Secondary Fuel Filter-If Equipped
Bleeding Fuel System
Draining Fuel Tank Sump
Clean Fuel Tank Vent Filter
Section : 115 - Maintenance-Electrical System
Replacing Fuses and Relays
GREENSTAR Implement Harness Fuse and Relay
Load Center Fuses
Load Center Relays and Diodes (Serial No. -902202)
Load Center Relays and Diodes (Serial No. 902203-)
Handling Halogen Light Bulbs Safely
Handling HID Light Bulbs Safely
Replacing Front Grille Lights
Adjusting Front Flood Lights
Adjusting Front Headlights
Adjusting Headlights
Replacing Instrument and Display Illumination Light Bulb
Replacing Dome Light Bulb
Replacing Front and Rear Hazard Lights-Early Cab Roof
Replacing Front and Rear Hazard Lights-Late Cab Roof
Replacing Roof Flood Lights-If Equipped
Replacing Courtesy Light-If Equipped
Replacing Fender Mounted Flood Lights
Rear Fender HID Bulb Replacement-If Equipped
Replacing Extremity Transport Warning Lights
Section : 120 - Troubleshooting
Engine Troubleshooting
Transmission Troubleshooting-24-Speed POWRSYNC
Transmission Troubleshooting-18-Speed Powershift
Hydraulic System Troubleshooting
Brakes Troubleshooting
Hitch Troubleshooting
Selective Control Valve Troubleshooting
Electrical System Troubleshooting
Operator Enclosure Troubleshooting
Steering System Troubleshooting
Section : 125 - Service Codes
Diagnostic Service Codes
Section : 130 - Storage
Placing Tractor in Long-Term Storage
Removing Tractor from Storage
Paint Finish Care
Section : 135 - Specifications
General Specifications
Overall Dimensions
Ground Speeds-24-Speed POWRSYNC Transmission
Ground Speeds-18-Speed Powershift Transmission
Identify Zinc-Flake Coated Fasteners
Metric Bolt and Screw Torque Values
Unified Inch Bolt and Screw Torque Values
Limited Battery Warranty
Section : 140 - Identification Numbers
Identification Plates
Record Tractor Identification Number
Record Engine Serial Number
Record Cab Serial Number
Record Transmission Serial Number
Record Axle Serial Number
Record PTO Clutch Serial Number
Record Rubber Track Serial Numbers
Camoplast Track Serial Numbers
Keep Proof of Ownership
Keep Machines Secure
Section : 145 - Lubrication and Maintenance Records
250 Hour Service Records
750 Hour Service Records
1500 Hour Service Records
2500 Hour Service Records
Annual Service Records
Two Year Service Records
4500 Hour or Five Year Service Records
Section : 150 - Glossary
Glossary of Terms
Section : SLIT - John Deere Service Literature Available
Technical Information
Section : IBC - John Deere Service Keeps You On The Job
John Deere Is At Your Service