1450, 1550, 1450 CWS, 1550 CWS, 1450 WTS and 1550 WTS Combines(048751- )
Copyright 2004 (c) Deere & Company. THIS DATA IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND/OR REPRODUCTION NOT SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice.
Foreword
Section : 00 - Identification Views
Combines Covered in This Manual
Section : 05 - Safety
Recognize Safety Information
Follow Safety Instructions
Prevent Machine Runaway
Understand Signal Words
Observe Road Traffic Regulations
Use Safety Lights and Devices
Prepare for Emergencies
Wear Protective Clothing
Handle Fuel Safely-Avoid Fires
Keep Riders and Children Off Machine
Use Seat Belts
Avoid Electrical Power Lines
Guards and Shields
Stay Clear of Harvesting Units
Keep Hands Away From Knives
Safe operation of Straw Chopper
Cleaning Grain Tank and Removal of Blockages
Check Machine Safety
Transporting The Combine on a Truck
Drive your Combine Safely
Transport with Header Installed
Ballasting for Safe Ground Contact
Swing in Grain Tank Unloading Auger
Park Machine Safely
Work In Ventilated Area
Practice Safe Maintenance
Service Machines Safely
Remove Accumulated Crop Debris
Appropriate Machine Propping
Use Proper Lifting Equipment
Servicing the Engine
Avoid High-Pressure Fluids
Prevent Battery Explosions
Handle Batteries Safely
Prevent Acid Burns
Observe Environmental Protection Regulations
Service Tires Safely
Field / Road Safety Tumbler Switch
Engine Coolant
Emergency Exit
Remove Paint Before Welding or Heating
Service Accumulator Systems Safely
Certificate of Ownership
Safe Storage of Machines
Section : 10 - Safety Decals
Pictorial Safety Decals
Operator's Manual
Repair and Service
Front Access Ladder and Platform
Fire Extinguisher
Feeder House Drive Shields
Under the Feeder House
Unloading Auger
Left-Hand Side Guard, Fan and Walker Drive Guard
Straw Chopper and Chaff Spreader
Straw chopper
Access to Rear Ladder and Service Platform
Right-Hand Side Guard
Reverser Shield
Jacking Points
Front Wheel Attaching Nuts
Rear Wheel Attaching Nuts
Transporting the Combine
Grain Elevator Shield
Straw Walker Shield
Grain Tank Extension
Grain Tank
Radio Antenna
Section : 15 - Controls and Instruments
General View of Controls and Instruments
Switch Console
Potentiometers on Switch Console
Switch Console (Continued)
Switch Console (Continued)
Corner Post
Switch Console (Continued)
Multifunction Control Handle
Roof Console
Roof Console
Steering Column
Types of Switches
Header Drive Tumbler Switch (With Operating Lock)
Separator Tumbler Switch (With Operating Lock)
Unloading Auger Swing Tumbler Switch (With Center Position)
Reel Speed Control Switch (DIAL-A-SPEED)
Reel Speed Adjustment
Selector Switch for Header Lateral Tilt Adjustment and Fore-and-Aft Adjustment of Reel
Demoisturizer Tumbler Switch
Mirror Heater Tumbler Switch-CWS/WTS (option)
Electric Adjustment of Mirror Switch-CWS/WTS (option)
Windshield Wiper Switch
Windshield Washer Rocker Switch
Throttle lever-1450/1550
Throttle rocker switch-CWS/WTS
Gearshift lever
Cab Fan Switch
Rotary Switch-Cooling Compartment
Rotary Switch - Air Conditioning/Heater
Threshing Cylinder Speed Switch
Fan Speed Switch
Concave Clearance Adjustment Switch
Unloading Auger Drive Switch (With Operating Lock)
"QUICK STOP" Switch
Road Safety Tumbler Switch (Red)
Horn Button
Starter Key
Feeder House/Header Reverser
Adjustment of Electric Baffle of Straw Chopper Distributor-CWS/WTS (option)
Four Wheel Drive Switch-1450/1550 (option)
Area Counter-Key Functions (CWS and WTS)
Area Counter - Setting up (CWS and WTS)
Area Counter - Encode of Wheel Circumference (CWS and WTS)
Area Counter - Encode of Working Width (CWS and WTS)
Area Counter-Key Functions (CWS and WTS)
Area Counter - Speedometer (CWS and WTS)
Area Counter-Meter Counter (CWS and WTS)
Area Counter-Fault Finding (CWS and WTS)
Area Counter-Error Indication (CWS and WTS)
Section : 20 - Warning Devices and Monitors
Indicator Lights I
Engine Oil Pressure Indicator Light
Coolant Temperature Indicator Light
Parking Brake Indicator Light
Indicator Light
Hydrostatic Drive Oil Temperature Indicator Light
Straw Walker and Chopper Warning Light
Straw Chopper Speed Indicator Light
Tailings Elevator Indicator Light
Straw Walker Indicator Light
Clean Grain Elevator Indicator Light
Fan Indicator Light
Threshing Cylinder Indicator Light
Indicator Lights II
Air Intake Temperature Indicator Light-CWS/WTS
Fuel Level Indicator Light
Air Cleaner Indicator Light
Hydraulic Oil Filter Indicator Light
Indicator Light
Alternator Indicator Light
Indicator Light
Grain Tank Indicator Light (3/4 full)
Beacon Light
Grain Tank Indicator Light (Full)
Unloading Auger Drive Indicator Light
Four Wheel Drive Indicator Light-1450/1550 (option)
Air Conditioner Indicator Light (High Pressure)
Indicator Light
Indicator Light
Indicator Light
Harvest Performance Monitor Gauge
Straw Distribution Gauge-CWS/WTS (option)
Fuel Gauge
Coolant Temperature Gauge
Header Height Gauge-CWS/WTS
Rigid Header - Ground Pressure Gauge-CWS/WTS
Cutterbar Pressure Gauge (600 Series Flex Headers)-1450/1550
Engine Electronic System Diagnostic Gauge-CWS/WTS
Viewing Active DTCs on Diagnostic Monitor
Area Counter (CWS and WTS)
INFOTRAK™ Monitor
INFO-TRAK Monitor Functions
INFO-TRAK Monitor Functions (Continued)
Setting and Displaying Time
Input of Machine-Specific Data
Software Version
Tire Radius Code
Machine Code
Transmission Speed Ratio Code
Determining Tire Radius
Engine Impulse Code
Threshing Cylinder Alarm Adjustment
Fan Alarm Adjustment
Infotrak Monitor Service Information
Preliminary Adjustments On Combine
Switching on Harvest Performance Monitor
Low Shaft Speed Monitoring System - Protected Components
Harvest Performance Monitor
Operational Adjustment of Harvest Performance Monitor sensors
Operational Adjustment of Harvest Performance Monitor (Continued)
Operational Adjustment of Harvest Performance Monitor sensors
Operational Check of Harvest Performance Monitor
Straw Walker and Chopper Warning Device
Section : 25 - Lighting System and Signals
Parking Light and Headlight Tumbler Switch
Full and Low-Beam Tumbler Switch
Full-Beam Indicator Light
Headlights
Turn-Signal Switch
Turn-Signal Indicator Light
Rear Turn-Signal Lights, Tail Lights and "STOP"Lights
Tumbler Switch For Work Lights on Cab Roof and Unloading Auger
Work Lights on Cab Roof and Unloading Auger
Tumbler Switch for Work Lights on Operator's Platform and Mirror Arms
Work Lights on Operator's Platform And Mirror Arms
Engine Compartment Lighting
Tumbler Switch for Grain Tank Lighting
Straw Walker and Cleaning Shoe Light
Beacon Light Switch Position
Tumbler Switch for Hazard Warning Lights
Using Hazard Warning Lights
Tumbler Switch for Indicator Light Bulb Test
Section : 30 - Operator's Cab
Cab Access Ladder
Cab Access Ladder Positions
Cleaning Cab Windows, Service Lights and Windshield Wiper
Opening Cab Door
Operator Presence Switch-CWS/WTS
Mechanical Adjustment of Operator's Seat Position-CWS/WTS
Mechanical Adjustment of Seat Position
Adapting Seat to Operator's Weight
Lumbar Support (Only Mechanical Seat)-CWS/WTS
Adjusting the Armrest
R.H. Armrest - Fore-And-Aft Adjustment
R.H. Armrest Storage Compartment
Cover of R.H. Armrest
Ashtray
Air Comfort Seat (Option)
Passenger Seat
Seat Belt
Document Pack Compartment
Cooling Compartment
Steering Wheel Height Adjustment
Steering Column Tilt Adjustment
Fire Extinguisher
Fire Extinguisher Location
Foot Brakes
Parking Brake
Releasing Parking Brake
Cab Side Window
Sun visor
Outside Mirrors
Heater-CWS/WTS (option)
Adjustable Air Louvers
Cab Interior Lighting
Radio And Citizens' Band Radio (Special Equipment)
Section : 35 - Pre-Starting Checks
Daily Checks
Engine Oil Level.
Hydraulic System Oil Level
Hydrostatic System Oil Level
Engine Coolant Level
Fuel Level
Windshield Washer Reservoir
After Long Storage Period
Tires
Fuel System
Combine Lubrication
Checks In Operator's Cab
Section : 40 - Operating the Engine
Breaking In The Engine
Safety Rules For Starting Engine
Before Starting Engine
Engage Ignition
Starting the Engine
Engine Oil Pressure Indicator Light
Warming Up Engine
Idling The Engine
Starting the Engine by Means of a Booster Battery
Operating In Tropical Conditions
Stopping the Engine
Stalling of Engine
Section : 45 - Driving and Transporting the Combine
Transporting The Combine on a Truck
Starting the Engine
Steering and Driving
Releasing Parking Brake
Operating the Foot Brakes
Engaging a Speed-CWS/WTS
Engaging a Speed-1450/1550
Forward and Reverse Travel
Reverse Travel Alarm-CWS/WTS
Choosing Correct Ground Speed
Engaging Four Wheel Drive-1450/1550 (option)
Avoid Overheating of Hydrostatic System
Transport Information
Trailer Hitch (option)
Transporting Under Own Power
Towing the Harvester
Section : 50 - Wheels, Axles and Additional Weights
Tightening Wheel Nuts
Tire Maintenance
Tubeless Tires
Tightening Wheel Nuts
Jacking Points
Mounting Tires
Changing Tires
Rear Axle Toe-In
Four Wheel Drive Axle Height and Width Adjustment-1450/1550 (option)
Tire Inflation Pressure
Counterweights
Steel Track Components-1450 (option)
Preparing the Combine
Fastening Steel Track
Checking Drive Wheel Alignment
Checking Parallelism Between Steel Tracks
Tensioning Steel Track
Track Maintenance and Precautions
Support Axle Maintenance
Checking Steel Track Components' Wear
Section : 55 - Preparations and Field Operation
Fundamentals of Combine Operation
Cutting and Harvesting Unit
Header
Feeder House Operation
Separator
Adjusting Cylinder Speed and Concave for Normal Crop
Adjusting Cylinder Speed and Concave for Coarse Crop
Separating Process
Grain Cleaning Process
Grain Recovery Process
Evaluating Threshing Action
Examining Threshed Straw and Grain Losses at Rear of Combine
Grain Tank Sample
Examination of Tailings
Inadequate Tailings
Identifying Threshing Problems
Overthreshing
Underthreshing
Adjusting Fan Speed
Adjusting The Chaffer
Slope Master System
Adjusting the Sieve
Adjustment of Cylinder and Concave
Grain Loss-Explanations and Examples
Causes of Grain Loss
Header Losses
Threshing Unit Losses
Straw Walker Losses
Sieve Losses
Prevention of Grain Loss- General
Threshing Adjustments - General Information
Basic Adjustments Charts
Soybeans
Wheat
Rice
Corn
Beans
Herbage
Sorghum
Oats
Sunflowers
Barley
Rape
Pea
Linseed
Preparations Before Harvesting Different Crop
Preparations for Harvesting Grain Crops
Preparations for Harvesting Corn
Preparations for Harvesting Oil Seed Crops
Operating the Combine
Automatic Float Control for 300 and 600-CWS/WTS series Rigid Headers
Return to Cut Position for 300 and 600-CWS/WTS series Rigid Headers
Header Automatic Height Control- 600-CWS/WTS Series Rigid Header
Multifunction Control Handle Functions
Section : 60 - Feeder House
Cutting and Harvesting Unit-Header Installation
Hydraulic Connections
Bracket For Hydraulic Hoses-300 Series Feeder House
Connecting the Transmission-300 Series Rigid Header
Connecting the Transmission-300 and 600 Series Flex Headers
Checking Header Leveling
Safety Stop
Third Feeder House Lift Cylinder
Connecting the Header
Removing Header
Multiple Connection for 600 -CWS/WTS Series Feeder House (option)
Adjusting Floating Drum Height-300 Series Feeder House
Adjusting Floating Drum Height-600 Series Feeder House
Adjusting Feeder House Front Face Angle
Tension of Conveyor Chains - 300 Series Feeder House
Tension of Conveyor Chains - 600 Series Feeder House
Header Lateral Tilt Locking › Only for Argentina
Section : 65 - Separator and Cleaning Unit
Cylinder Front Inspection Cover
Cylinder Side Inspection Ports
Opening Stone Trap Bottom Plate
Rasp Bars of Threshing Cylinder
Rotating Cylinder By Hand
Operation of Cylinder Drive Reduction Gear (option)
Concave And Cylinder Alignment
Concave and Cylinder Clearance Adjustment
Adjusting Concave Extension
Special Beater Wear Plates
Cylinder Baffle
Tooth Concave Closure Plates
Rice Harvesting Attachment
Rice Concave and Cylinder - Adjustment
Tooth Concave Closure Plates
Straw Walker Types
Straw Walker Fishbacks
Straw Walker Curtain
Adjusting Straw Walker Bearings
Cleaner Arms And Connecting Rods
Cleaner-Sieves
Chaffer Extension
Adjusting The Chaffer Extension Angle
Slope Master System for Hilly Terrain
Removing Chaffer Extension
Removing Chaffer
Grain Retention Plate
Adjusting Grain Retention Plate
Removing Grain Sieve
Cleaning The Chaffers And Sieves
Opening The Pan
Adjusting Air Flow Direction
Adjusting Fan Speed
Corn Concave
Special Kit for Corn
Section : 70 - Straw Chopper and Chaff Spreader
Straw Chopper (option)
Operating Straw Chopper
Engaging Straw Chopper
Disengaging Straw Chopper
Adjusting Straw Chopper Counterknives
Replacement of Straw Chopper Knives
Replacement of Straw Chopper Counterknives
Reducing Straw Chopper Rotational Speed
Straw Chopper Operating and Transport Position
Adjusting Straw Distributor Baffles
Electrical Adjustment of Straw Distributor Baffles-CWS/WTS (option)
Chaff Spreader Drive
Chaff Spreader Speed Adjustment-CWS/WTS
Chaff Spreader Operating Position
Chaff Spreader Transport Position
Chaff Spreader Position for Hitching Trailer-1450/1550
Lateral Swing of the Chaff Spreader-CWS/WTS
Swing of Chaff Spreader-1450/1550
Spread Angle Adjustment of Chaff Spreader
Section : 75 - Grain Tank Loading and Unloading
Grain Tank Inspection Window
Lower Elevator Inspection Doors
Elevator Augers
Clean Grain Elevator Upper Cover
Grain Tank Cover
Grain Tank Extension-CWS/WTS (option)
Access to Grain Tank -CWS/WTS (option)
Lower Auger Covers
Auger Feeder
Elevator Conveyor Chain Tension
Adjusting Tailings Elevator Conveyor Chain
Adjusting Clean Grain Elevator Conveyor Chain
Section : 80 - Fuel, Lubricants, Coolant and Capacities
Fuel
Handle Fuel Safely-Avoid Fires
Filling Fuel Tank
Diesel Engine Oil-CWS/WTS
Engine-Crankcase Capacity (Including Filter Change)
Air Compressor Crankcase Capacity
JD 15W-40 Diesel Engine Oil-1450/1550
Engine Coolant
Cooling System Capacity
Gear Lubricant
Changing Transmission Oil
Final Drives
Cylinder Drive Reduction Gear
Chaff Spreader Transmission-1450/1550
Hydraulic System Oil
Hydraulic System Oil-Capacity
Hydrostatic System Oil
Brake Fluid for Brake System
Grease
Lubricant Storage
Alternative and Synthetic Lubricants
Use Genuine John Deere Parts
Section : 85 - Lubrication Chart, Periodic Service
Service Points-Daily
Service points-Every 10 hours
Service points-Every 10 hours
Service points-Every 50 hours
Service points-Every 50 hours
Service points-Every 100 hours
Service points-Every 100 hours
Service points-Every 200 hours
Service points-Every 200 hours
Service points-Every 250 hours
Service points-Every 500 hours
Service points-Every 500 hours
Service points-Every 750 hours
Service points-Every 1000 hours
Service points-Every 1500 hours
Service points-Every 2000 hours
After Each Harvesting Season
Belts
Chains
Section : 90 - Service-Engine
Tool Box
Access to Engine
Engine Compartment
Adjusting Engine Valve Tappets
Checking Engine Crankcase Oil Level
Changing Oil and Filter
Air Compressor Oil Change
Avoid High-Pressure Fluids
Do Not Modify Fuel System
Fuel System in 6.8 L Engines-1450
Fuel System in 6.8 L Engines-CWS/WTS
Fuel System in 8.1 L Engines-1550
Fuel Tank Cap
Fuel Tank Water Trap
Cleaning Fuel Filter Water Trap-1450/1550
Mechanical Fuel Transfer Pump in 6.8 L Engines-1450
Cleaning Fuel Filter Water Trap-CWS/WTS
Bleeding off Water from Fuel Filter in 6.8 L Engines (1450) and 8.1 L Engines (1550)
Bleeding off Water from Fuel Filter in 6.8 L Engines-CWS/WTS
Bleeding the Fuel System
Bleeding off Fuel Filter in 6.8 L Engines-1450
Replacing Fuel Filter in 6.8 L Engines-1450 and CWS/WTS
Bleeding Fuel from Filter on 8.1 L Engines-1550
Replacing Fuel Filter in 8.1 L Engines-1550
Checking Injection Nozzles
Bleed at Fuel Injection Nozzles - Engines without ECU
Bleeding Fuel System-Engine using ECU
Engine Coolant
Radiator Coolant Level
Cooling, Air Intake and Exhaust System-1450
Cooling, Air Intake and Exhaust System-1550
Cooling, Air Intake and Exhaust System-CWS/WTS
Replacing Thermostat
Checking Tension of Alternator V-Belt Tensioner Spring and Belt Wear
Checking Tensioner Spring Tension
Replacing Fan/Alternator V-Belt
Cleaning Rotary Screen, Oil Cooler, Condenser and Radiator
Replacing (Engine) Cooling Fan Belt
Rotary Screen Belt Routing
Replacing Rotary Screen Drive Belt
Rotary Screen-Replacing External Drive Belt
Adjust Rotary Screen Knife Comb
Replacing Rotary Screen Rake Bar
Cooling System-Flushing Sequence
Radiator Drain
Drain Plug For Engine Coolant
Removing Engine Air Filter
Cleaning and Inspecting Filter Insert
Air Filter Assembly-Components
Turbocharger
Crankshaft Damper Inspection
Engine Grounding
Section : 95 - Service-Compressed Air System
Compressed Air System Reservoir
Draining The Air Reservoir
Compressed Air Hose
Using Compressed Air
Adjusting Compressor Drive Belt Tension
Section : 100 - Service-Drives and Shields
Opening the Right-Hand Side Shield
Opening the Fan Shield
Threshing Cylinder Pulley Shield-CWS/WTS
Opening the Left-Hand Side Shield
Opening the Straw Chopper and Chaff Spreader Idler Pulley Shield
Opening the Header Drive Shield
Drive Chains Tension
Adjusting Hydraulic Pump Belt Tension
Adjusting Feeder House Slip Clutch
Adjusting Feeder-House Drive for Header
Replacing Feeder House Drive Belt
Adjusting Feeder House Hydraulic Reverser Drive Chain
Replacing Threshing Unit Drive Belt
Adjusting Threshing Unit Belt Guide
Adjusting Hydraulic Variable Speed Drive
Replacing Cylinder Variable Drive Belt-Combines With Posi-Torq Cylinder Drive
Adjusting Straw Walker V-Belt Tension
Adjusting Straw Walker Drive Chain Tension
Adjusting Straw Walker Slip Clutch
Adjusting Fan Variable Speed Drive Belt Tension
Replacing Fan/Alternator V-Belt
Adjusting Tailings Elevator Drive Belt Tension
Adjusting Tailings Elevator Slip Clutch
Adjusting Tailings Auger Drive
Adjusting Clean Grain Elevator Slip Clutch
Clean Grain Elevator Drive Belt
Adjusting Upper Auger Drive Chain
Adjusting Unloading Auger Feeder Drive
Adjusting Unloading System Drive
Adjusting Unloading Auger Drive Chain
Tensioning Straw Chopper Intermediate Drive Belt
Section : 105 - Service -Electrical System
Prevent Battery Explosions
Removing Battery
Cleaning the Battery
Battery Electrolyte Level
Storing and Handling Battery
Battery Switch
Installing and Connecting the Battery
Using a Booster Battery
Alternator
Starting Motor
Electronic Boards
Removing Electrical Box
Access to the Relay and Diode Board
Fuses on Fuse Board
Fuse Tester
Relays on Fuse Board
Relay and Diode Board
Starting Motor Relay-1450/1550
Starting Motor Relay-CWS/WTS
Solenoid Valves (Main Hydraulic Block)
Solenoid Valves (Secondary Hydraulic Block)
Error Codes, INFOTRAK Monitor
Automatic Header Control System Error Codes
Header Test Procedures
Preliminary Header AHC Calibration Procedures
Header AHC Calibration Procedure for 600 Series-Step by Step
300 and 600-CWS/WTS Series Rigid Header Float Calibration Procedure
Dipswitches and Lights of Reel Speed Control Board
Dipswitch Positions
Reel Speed Control Board Error Codes
Section : 110 - Service - Hydraulic System
Avoid High-Pressure Fluids
Hydraulic System Description
Pressure Relief Valves
Functions of the Valves on the Block
Cutting Platform Raise and Lower Speed Adjustment
Hydraulic System Reservoir Oil Level
Changing Hydraulic Oil and Filter
Bleeding Hydraulic System Oil
Refilling the Hydraulic System
Bleeding Air from the Reel Raise and Lower Hydraulic System
Bleeding Air from the Fore and Aft Hydraulic Circuit of the Reel
Accumulators
Section : 115 - Serv.-Hydrostatic Var. Speed Drive & Brakes
Brake System
Brake Fluid Reservoir
Adjusting Foot Brakes
Parking Brake
Hydrostatic Drive Components-1450/1550
Hydrostatic Drive Components-CWS/WTS
Changing Hydrostatic Drive Oil and Filter
Cleaning Oil Cooler
Transmission
Final Drives
Adjusting Play of Final Drive Flanged Axle Bearings
Tightening Front Axle Attaching Nuts and Bolts
Steering System Components
Section : 120 - Service-Air Conditioning and Heating
Air Conditioning System Components
Heater Components
Air Intake And Distribution
Compressor Drive Belt
Refrigerant Level
Low Pressure Switch
High Pressure Switch
Cleaning Condenser
Cab Filters
Removing Paper (Main) Filter Element
Cleaning Paper Filter Elements
Removing Cab Recirculating Filter
Air Intake Opening
Condensed Water Drain Hose
Section : 125 - Storage
At Season's End
At Season's End- Engine
At Season's End - Air Conditioning System
Removing Combine From Storage
Removing Combine From Storage-Engine
Removing Combine From Storage - Air Conditioning System
Removing Combine From Storage-Four Wheel Drive
Section : 130 - Specifications
Operating Speeds
Specifications-1450 and 1450 CWS/WTS combines
Specifications-1550 and 1550 CWS/WTS combines
Power Separator-WTS
Four Wheel Drive-1450/1550 (option)
Tracked combine-1450 (option)
Wheeled combines
Combine dimensions
Safety Note Regarding the Subsequent Installation of Electrical and Electronic Appliances and/or Components
Metric Bolt and Cap Screw Torque Values
Unified Inch Bolt and Cap Screw Torque Values
Declaration of Conformity
Section : 135 - Serial Number
Type Plates
Combine Serial Number-1450/1550
Combine Serial Number-CWS/WTS
Engine Serial Number
Three-Speed Transmission Serial Number
Four Wheel Drive Serial Number
Section : IBC - John Deere Keeps You On The Job
John Deere Parts
The Right Tools
Well-Trained Technicians
Prompt Service